How to Run Drain Lines

Installing a new drainpipe is only a five-step process, but there are many important factors to consider before breaking out the PVC pipe. First, you’ll need to draw a plan and get it approved by a local plumbing inspector. Then, consider insulation for pipes, especially if you live in a cold climate. remove any cabinets and shut off any wires that are in the way

How to Extend Supply Lines

Your kitchen needs access to both hot and cold water, and this how-to shows you the proper way to run or extend those supply lines. Before you begin, install the drain line and carefully plan the location of the supply lines. Make sure you shut off the water before getting started.

How to Install an Air Admittance Valve

Air admittance valves are gravity-operated devices that respond to the negative pressure of draining water and automatically open up to let air in. These valves can help you run new vent lines without having access to the existing drain-waste-vent system, and we’ll show you exactly how to install them.

How to Install a Kitchen Sink

A sink is likely the most important fixture in your kitchen. Learning how to install one yourself can keep the cost of any kitchen remodel down. Before you begin, decide how many holes your sink model requires. This figure depends on whether the faucet you plan to install has one or two handles, whether you want a separate sprayer, and other factors